|
Post by mattsedgley on Jun 14, 2010 19:15:48 GMT
I'm feeling left out of this whole speed passion party...
what's the deal? - what's hot? - what's not? what do you have to do it from the box to get it quick?
|
|
|
Post by Reuben on Jun 14, 2010 19:54:23 GMT
solder it in and press go? seemed to work. Well what you need is a LCD programming card, either the HW or SP one will do. Once you got that for Stock you will want to use either software versions: 422_Stock (if using the SP software) or 518_Stick (if using the HW software) 518 has a few issues fixed that were in 422 (dont know why SP havent released 518). I have had both SP and HW software on my SP 2.0gt, at present I am using the Hobbywing 518_Stock. Hobbywing software can be found as USB Link software: www.hobbywing.com/english/downloads.aspSpeed passion can be found on Sp site Useful instructions about how to use the Software can be found: www.hobbywing.com/english/downloadsm.asp?id=40For Bashley - so far (these are my settings, use them at your own risk), ive only put the main speed and boost settings (the rest are personal preference) 17.5 FDR: 6.1 4: 7 9: 7 12: 8 13: 1 14: 5 15: 4 13.5 FDR: 7.2 4: 7 9: 7 12: 8 13: 4 14: 5 15: 5 Now im not convinced that these are the quickest settings and are still definitely a work in progress. But could be a good starting point? just remember to manage your temps and dont just thing these settings will survive 5 minutes. Temps on a hot day between 70-75C HTH
|
|
|
Post by yellowshark on Jun 14, 2010 21:03:48 GMT
We ran the Tekin 13.5 at 7.2 also Matt, so probably a good place to start. I'd give you the software settings too but they would only make you jealous ;D
|
|
|
Post by mattsedgley on Jun 14, 2010 21:25:37 GMT
I've run a tekin Pete. Its not for me... I like brakes... the gm runs a similar ratio...
|
|
|
Post by yellowshark on Jun 15, 2010 11:50:52 GMT
LOL that had me writhing on the floor Matt ;D You need 203, but we still had a problem too. Turns out it was because we were running no drag brake, Craig's preference. Put some drag on and the brakes started to work.
|
|
|
Post by Reuben on Jul 22, 2010 8:43:20 GMT
There is a document in the SP 1.33 download that explains the software very well and is very similar to the HW document above. But has a few extra words that are very important to how the software works.
I know I have miss-read it and miss-understood how the software works, but now I think I understand it, so I reckon there will be changes to the settings above. But as of now these are the ones I am currently using with great success at Bashley.
|
|
|
Post by Reuben on Jul 22, 2010 12:18:41 GMT
heres the file Attachments:
|
|
|
Post by darrenoakley on Jul 22, 2010 12:20:27 GMT
Someone on rc tech has also done a tutorial of how to update the programing box and set up the software/speedo Really usefull I found
|
|