TC6 Build.

justchris
On the Hill

A DUCK !!

Posts: 349

TC6 Build. Jan 29, 2011 20:15:54 GMT

Quote

Post by justchris on Jan 29, 2011 20:15:54 GMT

Hi everyone

As some of you knew, I went to RCLazy today to build my TC6. Really, really good laugh and good fun. Simon and Mark are really nice people (it was going just fine but luckily Reuben turned up and we then built it the right way round!!!).

Sorry about the picture but Lynn's not home. Let me put that another way - got back from Bournemouth at 5pm - it's now 8.17 and 2 photos is all I have and this writing. ;D ;D

For other new people, I recommend any of the RCLazy workshops - they're good fun and also very good if you're knowledge is limited - e.g. like mine!!!!!! But the basic handbook in the other post I put up lets you get to grips with what people are saying. Now, I'm not sure which shell to use as Lynn's been busy (not busy enough - need to get her out there spraying again!)

Thats the one!!!!!!!!!!!!!!!!!

All The Gear And No Idea....

ginge On the Hill sherrrrrrrrrrTING!!!!!!!!! Posts: 297	TC6 Build. Jan 29, 2011 20:27:09 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ginge on Jan 29, 2011 20:27:09 GMT Chris mate that monster shell is the nuts!!!!! i know where my next shell is heading to be sprayed... lynn well done keep it up!! Ginge
	I have my racing excuses ready!! "You win some, you lose some, you wreck some" " I was doing fine until about mid-corner when I ran out of talent" "A 10-car pileup never happens behind you!" "unlike car racing, golf, football, and soccer only require one ball" "Friends don't let friends apex early. " "If you can't run with the big dogs, Stay on the porch" TC6 AWESOME! 17.5/ 19/305.34

Reuben I need to race more, and chat less Very Helpful Club Member Posts: 1,918	TC6 Build. Jan 29, 2011 20:34:14 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Reuben on Jan 29, 2011 20:34:14 GMT yeh it was a good day. even though we managed to put the C-hubs on the wrong way !! it looks like a very fine car with some nice touches.
	T3-11ish ----------------------- Boosted 17.5 = 21/309.76 \| 13.5 = 21/304.87 Stock 20/something

darrenoakley Guest	TC6 Build. Jan 29, 2011 20:42:57 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by darrenoakley on Jan 29, 2011 20:42:57 GMT C hubs round the wrong way. You would never catch me doing something as stupid as thats with my T3 when i built it and did one run like it. lol

martinchallis On the Hill SHMCC Committee Member Posts: 482	TC6 Build. Jan 29, 2011 22:04:21 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by martinchallis on Jan 29, 2011 22:04:21 GMT bloomin c hubs - i made that mistake recently, im sure i will again... Lynn is certianly talented with masking tape and an airbrush...
	Fast - Over 1 Lap

jamietraylor On the Hill Posts: 413	TC6 Build. Jan 29, 2011 23:00:19 GMT via the ProBoards App Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jamietraylor on Jan 29, 2011 23:00:19 GMT Love the shell's!!
	10.5=21/312 (8/09) 009 Gen 2 13.5=21/311 (7/10) 416x Gen 3 17.5=20/300 (8/10) 416x Gen 3

Post by justchris on Jan 29, 2011 20:15:54 GMT

Post by ginge on Jan 29, 2011 20:27:09 GMT

Post by Reuben on Jan 29, 2011 20:34:14 GMT

Post by darrenoakley on Jan 29, 2011 20:42:57 GMT

Post by martinchallis on Jan 29, 2011 22:04:21 GMT

Post by jamietraylor on Jan 29, 2011 23:00:19 GMT