|
|
Post by yellowshark on Mar 21, 2011 15:44:29 GMT
For you T3 drivers:posted on the XRAY site today by Martin Hudy
Sorry for confusing you, there is a mistake in the set up book. For T3 cars, when you use 1.5 shim and 0° upright, you get 3 degree toe in. Please check set up sheet for final toe, set up sheet is correct. (we made a mistake when we were transfering text from T2 to T3 set up book)
sorry for that
|
|
|
|
Post by darrenoakley on Mar 21, 2011 16:16:23 GMT
I am sure Liam Rueben Jamie and Myself will forgive you Pete. Just get someone to proof read it next time mate. ;D No cheers for that will check mine tonight |
|
|
|
Post by darrenoakley on Mar 21, 2011 16:17:33 GMT
Yeah I am crossing the line, just noticed.  |
|
|
|
Post by Reuben on Mar 21, 2011 17:29:01 GMT
i dont get it
|
|
|
|
Post by darrenoakley on Mar 21, 2011 20:29:49 GMT
To be honest I cant find the bit in the book that says otherwise. Mine says 1.5mm = 3deg toe. Have you seen it Pete ?
My stock set up sheet also says the correct shims and final toe.
|
|
|
|
Post by yellowshark on Mar 22, 2011 9:59:23 GMT
To be honest I cant find the bit in the book that says otherwise. Mine says 1.5mm = 3deg toe. Have you seen it Pete ? My stock set up sheet also says the correct shims and final toe. I am flying blind a bit here guys as I don't have a T3 and therefore nor a printed setup book. But looking at the .pdf version of the setup book which presumably is the same as the printed version! On page 19 it says that 1.5mm shim with 1* outboard toe gives you 3* toe. This is incorrect. 1.5mm shim with 0* outboard toe (ie I assume as shipped in the kit because they normally ship 0* uprights) gives 3* - which is what Martin Hudy is saying. HTH |
|
|
|
Post by yellowshark on Mar 22, 2011 10:01:50 GMT
Hudy premier setup station available this coming Sunday for checking your toes if needbe |
|
|
|
Post by darrenoakley on Mar 22, 2011 14:01:12 GMT
Yeah it shouldn't be a problem as the kit uprights are 0 deg.
|
|
