|
Post by jamietraylor on Jul 23, 2011 20:00:48 GMT
Hi everyone not long now until we go indoor's. I have been given the job of sorting out the new track marker's and bring our club up to date! Can I have people's opinion's on what they would like and where I can get it from? I was thinking White gutter down pipe for the main track marker's with high visibility tape on top, wood for straight joiner's and tee pieces.
|
|
|
Post by Reuben on Jul 23, 2011 20:45:51 GMT
I vote box sectioned pipe, then you will just bounce off rahter than getting stuck under a round pipe.
and flexy flappy ends please
|
|
|
Post by jamietraylor on Jul 23, 2011 22:22:07 GMT
It will be square pipe. Yeah flappy ends are good for corners and ends
|
|
|
Post by darrenoakley on Jul 24, 2011 7:08:55 GMT
I have forwarded you the email from the Chippenham bloke that built there track mate.I will give you a hand doing it. Speak about it tomorrow night.
|
|
|
Post by darrenoakley on Jul 24, 2011 7:31:29 GMT
Can anyone confirm the full size of the carpets once rolled out please ?
|
|
|
Post by Reuben on Jul 24, 2011 16:19:50 GMT
12m x 14m rings a bell...... 2m widths 14m lengths?
|
|
|
Post by Reuben on Jul 24, 2011 16:54:19 GMT
attached is a sample track and empty picture for track designs.. Each grey box is 2mx2m and the black boxes are touring cars. hope it helps, I should have 6 or so track designs sooon. but everyone is more than welcome to have a go themself at a track design Attachments:
|
|
|
Post by Reuben on Jul 24, 2011 17:05:29 GMT
track 2, red bits are flappers and edges for curves Attachments:
|
|
|
Post by Reuben on Jul 24, 2011 17:11:39 GMT
track 3 Attachments:
|
|
|
Post by Reuben on Jul 24, 2011 17:14:16 GMT
track 1 re-posted Attachments:
|
|
|
Post by Reuben on Jul 24, 2011 17:22:14 GMT
track4 thats it for now, ill get creative again later Attachments:
|
|
|
Post by darrenoakley on Jul 24, 2011 17:45:11 GMT
Cheers mate that will really help when getting the pipe ordered I was looking today for track design program as I don't have a clue about CAD programs.
|
|
|
Post by jamietraylor on Jul 24, 2011 19:31:53 GMT
Cheers m8 loving the layouts!
|
|
|
Post by Reuben on Jul 25, 2011 17:54:04 GMT
1 more Attachments:
|
|
|
Post by Reuben on Jul 25, 2011 17:54:42 GMT
and another..... come one people get creative Attachments:
|
|
|
Post by martinchallis on Jul 25, 2011 20:17:55 GMT
what chassis are the black dots - ?
|
|
|
Post by ginge on Jul 25, 2011 20:26:34 GMT
|
|
|
Post by Reuben on Jul 25, 2011 20:28:37 GMT
roughly the size of the touring car,
each square is 2x2m, as there are 6 rolls of carpet that are 2m wide.... Im pretty sure they are 2m wide anyway
|
|
|
Post by Reuben on Jul 25, 2011 20:40:02 GMT
1 more with an even more unfair start position especially for Ginge Attachments:
|
|
|
Post by ginge on Jul 25, 2011 20:42:50 GMT
lmao ;D ;D its ok mate its usually me whos at the back anyways lol Ginge
|
|
|
Post by Reuben on Jul 25, 2011 23:38:15 GMT
last one ......... maybe ;D Attachments:
|
|
|
Post by darrenoakley on Jul 26, 2011 5:56:48 GMT
Still waiting for a reply from the plastics company for the strips that make up the flappers.
|
|
|
Post by darrenoakley on Aug 24, 2011 18:10:05 GMT
Update Jamie now has the pipe and I am in the process of ordering the plastics and wood for the joins,then we can start making the corner and end pieces. Wont be ready for first meeting I wouldnt have thought though.
|
|
|
Post by lesbaldry on Aug 25, 2011 16:31:56 GMT
Nah 2nd has the iside line ,got the power down early and is mustard on the brakes.....Must be a TC6 ;D
|
|
|
Post by darrenoakley on Sept 26, 2011 13:18:18 GMT
Finally have had the flapper plastic delivered to my place so will work on the measurements over the next few evenings. This way Jamie and myself should be able to construct the majority of it off site and then just put it together on the first race night. We are defiantly on for the Miller Mile now. If anyone has a preference of one of the layouts of Rueben's above for the event please post on here and that will be the one we build next. I was going to start on track 2 as it looks the one with less cutting. Maybe try this on a club night and then build the Miller Mile one next (was thinking easy first ? Anyone with any input or wanting to help out is more than welcome as we want it to be right for everyone.
|
|
|
Post by darrenoakley on Sept 26, 2011 13:26:54 GMT
This is a grid paper I made that is the exact size of the carpets if anyone want to jot anything down. 1 square is 10cm in real size. Attachments:
|
|
|
Post by darrenoakley on Sept 27, 2011 15:37:26 GMT
Correction. One square is 20cm not 10cm.
|
|