|
Post by MonkeyNuts on Feb 23, 2009 19:41:56 GMT
Where abouts would be the best place to put weight on a shaft drive to get it up to 1450g??
Either end of the LiPo? Under the Drive Shaft?
I've heard people with Evo5's etc putting in different places, where about do you think would be the best?
Cheers, Liam
|
|
|
Post by lesbaldry on Feb 23, 2009 20:22:28 GMT
Where abouts would be the best place to put weight on a shaft drive to get it up to 1450g?? Either end of the LiPo? Under the Drive Shaft? I've heard people with Evo5's etc putting in different places, where about do you think would be the best? Cheers, Liam As close and as low as poss to the CG without upsetting the lateral balance...either end of the Lipo is not good, keep the weight central, either side of the pack if you can..if you can get most or some weight centrally under the shaft all the better and use the remaining weight to laterally balance the car on the outside edge of the Lipo pack...hope this helped some.
|
|
|
Post by MonkeyNuts on Feb 23, 2009 20:48:22 GMT
Cheers Les
|
|